100L 200L Advanced Vacuum Steam Autoclave-Henan forever Medical Co., Ltd.

Product Feature

1.The touch screen display of temperature, pressure,time,running status and failure warning.

2.Pre-set cycles for a variety of items and tests, alarms, safety systems, temperature working range, vacuum diagnostic system, Bowie Dick Type Test.

3.Custom mode :possible for operator to alter parameters/add new operating cycles.

4.3-times pre-vacuum, effective discharge cold air from chamber to improve steam efficiency.

5.Internal steam generator, PLC control, space and energy saving.

6.Equipped with post-drying function which makes the residual humidity of sterilized articles less than 0.2%.

7.Water shortage alarm, Over-heat auto protection device, door safety lock device, over-pressure relief valve, short-circuit protection and over-pressure protection.

8.Perfect program design system to avoid damage caused by mistake operation.

9.The post-sterilization hot steam is cooled down before discharge from machine.

10.Equipped with water quality monitor . extend the machine service life.

Technical Specification

Equipment Type	vacuum steam autoclave sterilizer
Certificate	CE ISO CFDA
Machine size	11507701520 mm(100L) 13608101580(200L)
Working temperature	121℃ -134 ℃
Power supply	AC 380V, 50Hz
Working pressures	210kPa-230kPa (2.1-2.3Bar)
Space needed	the machine shell are removable, end wheels , 500 mm space from Autoclave are enough for maintenance
Safety over-pressure	1.Over-pressure warning alarm 2. safe pressure relief valve 3. over-temperature heating shut-off device
Safety door interlock	PLC set: the door can't open while vessel is under pressure; can't start up if the door is not properly closed
Safety emergency shut-off	Red Emergency button in a readily accessible location
Safety surfaces	Surfaces operator may contact NOT exceeding 50°C
Safety vacuum breaker	During a power outage or other failure the vacuum will stop, and replace to the Atmosphere
Materials of construction	304 stainless steel
Pre-set operating cycles	Pre-set modes: naked instrument，fabric ，rubber ,high pressure
Pre-set leak testing	Pre-set BD test(Bowie Dick Type Test) for leak testing and vacuum pump diagnose.
Door	mechanical rotating locking with electronic sensor
Controls	1. multiple pre-set operating cycles. 2. user setup ,possible for operator to alter pre-set cycle parameters/add new pre-set operating cycles

	3. system setup ,For purposes of maintenance, testing, or in cases of emergency. 4. The sterilizer protected against the effects of short circuit in inputs and outputs that are connected to the controller
Display indicators	door locked, operation in progress, major operating cycle stages, and cycle complete ,times , temperature ,pressure , fault condition readable by normal vision from a distance of 1.2 m
Indicator for temperature	± 1% accuracy over the scale range 50°C to 150°C; 0.1°C resolution for digital display
Indicator for pressure	± 1.6% over the scale range -0.6 bar to 3 bar; 0.1kpa (0.001bar) resolution for digital display
Indicators for processing time	Error not to exceed 1%
Fault condition	In the event of a failure of the automatic controls, or if a failure occurs that prevents the completion of the process, the controls screen show a visual indication of failure and an audible alarm.
Mini printer Recording	Recording of time, temperature and pressure include values during transition points throughout the operating cycle
Vacuum	-80Kpa ~90Kpa ( -0.8bar ~0.9 bar )
Decontamination of air	Air filter with activated carbon filtration, steam treatment to prevent release of pathogenic aerosols
Markings	Markings for safety and operation comply with EN 13445
Manuals	English language. 1. Operation instructions (including process description), 2. Loading and maintenance procedures. 3. Short-form of operation and loading procedures.
Spare parts(option)	a. Heating element b. Door seal/gasket c. Replacement air filter d. Safety valve e. Pressure and temperature gauges