If you have any question, please contact us
If you have any question, please contact us
8 inch high brightness (800×600) colorful TFT LCD • Simultaneous display of 7 lead ECG waveform • Indented menu layout to maximize the space for display • Protection agasint defibrillation and ESU interference • New SPO2 technology to assure precise measurement • Precise SPO2 measurement for low prefusion & finger motion • Analysis of real time ST segment arrhythmia • Able to analyze 15 kinds of drug level • 168 hour graphic and tabular trend with data storage • High efficient power management without electric fan to avoid cross contamination • Up to 66 beds for networking capacity to connect with HIS • 750 group NIBP data for recall and display Standard configuration: ECG, NIBP, SpO2, PR, RESP, TEMP, HR
ECG:
Lead mode: 5 leads(R,L,F,N,C or RA,LA,LL,RL,V)
Lead selection : I,II,III,avR,avL,avF,V
Waveform: 3ch
Lead mode: 3 Leads(R,L,F or RA,LA,LL)
Lead selection: I,II,III
Waveform: 1ch
Gain selection: x2.5mm/mV,x5.0mm/mV,x10mm/mV,x20mm/mV,auto,deviation<±5%
Sweep speed: 6.25mm/s;12.5mm/s;25mm/s;50mm/s
Heart rate range: Adult: 15~300bpm; Neonate/pediatric:15~350bpm
Accuracy: +1bpm or +1%,whichecer is greater
Resolution: 1bpm
Sensitivity: >200(uV p-p)
ECG signal: 0.2~8mV
Different input impedance >5MΩ
Bandwidth: Surgery 1~15Hz, Monitor 0.5~35Hz, Diagnostic 0.05~100Hz
Common mode rejection ratio(CMRR)
CMRR: monitor >105dB, Operation >105dB, Diagnose >85dB
Electrode offset potential ±300mV
Pace pulse detection conditions:
Amplitude: 1 mV~10 mV, width 0.5ms~2ms, rise time: 10us~ 100us
Baseline recovery time < 3 S after Defi.
SPO2
Measurement range: 0~100%
Resolution: 1%
Accuracy: +2%(70-100%);0-69% unspecified
Alarm range 0~100%
Pluse Rate:
range: 20~300bpm
Resolution: 1bpm
Error: +3bpm
NIBP
Method: oscillometric
Operation mode : Manual/Automatic/STAT
Auto measurement time: Adjustable(1~480min)
Measurement Unit: mmHg/Kpa selectable
Measurement types: Systolic, Diastolic, Mean
Measurement range:
Range of Systolic pressure:
Adult: 40~270mmHg
Pediatric: 40~220mmHg
Neonate: 25~140mmHg
Range of mean pressure:
Adult: 20~235mmHg
Pediatric: 20~165mmHg
Neonate: 20~125mmHg
Range of diastolic pressure:
Adult: 10~215mmHg
Pediatric: 10~150mmHg
Neonate :10~115mmHg
RESPIRATION
Method: RA-LL,RA-LA
Measure inpedance range: 0.3~3.0Ω
Baseline impedance range: 200-4000Ω
Measurement range: Adult:0~120Brpm; Neonate/Pediatric:0~150Brpm
Apnea alarm: YES,10~40s
Resolution: 1rpm
Accuracy: +2rpm
TEMPERATURE
Compatible probe: YSI or CYF
Measurement range: 5~50℃
Resolution : 0.1℃
Accuracy: +0.1℃
Refreshing time: about 1
Average measuring time: <10s
| Product parameters: | |||
| Power Supply | Adapter | Output 13-20V DC, 5A | |
| Voltage | AC100~240V, 50/60HZ | ||
| Display | 8" color TFT LED | ||
| Resolution | 800*600 pixels | ||
| Battery (Pluggable) | Type | Rechargeable lithium battery 14.8V/2200mAh | |
| Charge Cycle | ≥500 times | ||
| Working time | 5.5 hours | ||
| Recorder (Option) | Method | Thermal printer | |
| Paper width | 50 mm (1.97 in) | ||
| Printing speed | 25/ 50 mm/s | ||
| Trace | Max. 2 tracks | ||
| Recording way | Real-time Recording | ||
| Alarm: | Level | Low, medium and high | |
| Indication | Auditory and visual | ||
| Alarm volume adjustable | |||
| Alarm pause time | 1min, 2min | ||
| Parameter alarm type | Latch/ Unlatch | ||
If you have any question, please contact us
